
What’s the working principle of 4 sided planer machine?
- The main working principle of 4 sided planer machine is based on the precise design machine structure as well as the high speed of saw blade spindle. Through the adjusting speed of saw blade spindle, wood material feeding speed and the planer thickness, different work can make.
- Meanwhile, the design of 4 sided planer machine has fully consideration of safety, including the safe protecting mask of saw blade spindle and emergency stop device equipment to ensure the safety of operators.








Technical Parameter of Four side planer
| Specification | ELA-623GH | ELA-723GH | ELA-823GH |
| Planing Width (mm) | 20-230 | 20-230 | 20-230 |
| Min. Planing Length (mm) | 10-160 (Max 230) | 10-160 (Max 230) | 10-160 (Max 230) |
| Profile Dimensions (mm) | 720×280 | 720×280 | 720×280 |
| Table Height (mm) | φ 50 | φ 50 | φ 50 |
| Cutter Spindle Speed (rpm) | 7000 | 7000 | 7000 |
| First Bottom Cutter Diameter (mm) | φ140 – φ 180 | φ140 – φ 180 | φ 140 – φ 180 |
| First Top Cutter Diameter (mm) | φ 140 – φ 250 | φ 140 – φ 250 | φ 140 – φ 250 |
| Second Top Cutter Diameter (mm) | φ140 – φ250 | φ 140 – φ 250 | φ 140 – φ 250 |
| Second Bottom Cutter Diameter (mm) | φ 140 – φ 250 | φ 140 – φ 250 | φ 140 – φ 250 |
| Universal Spindle Diameter (mm) | φ 140 – φ 250 | φ 140 – φ 250 | φ 140 – φ 250 |
| Total Motor Power (kW/HP) | 71.9/96 | 106.2/142 | 91/121 |
| Feed Motor (kW/HP) | 0.75/1 | 1.5/2 | 1.1/1.5 |
| Beam Elevation Motor (kW/HP) | 0.37/0.5 | 0.37/0.5 | 2×0.37/0.5 |
| Top Cutter Elevation Motor (kW/HP) | 0.75/1 | 0.75/1 | 0.75/1 |
| Feed Speed (m/min) | 10-60 | 10-60 | 10-50 |
| Spindle Diameter (mm) | φ140 | φ 140 | φ 140 |
| Machine Dimensions (mm) | 5660x2100x1900 | 5660x2100x1900 | 6580x2080x1960 |
| Machine Weight (kg) | 8300 | 9800 | 10100 |
Features of Four sided planer
- Machine body is high grade cast iron to ensure stability.
- This adopt step-less feeding, material feeding speed ranges from 10 to 35 meters/min.
- Each spindle driven by an independent motor, with strong cutting force.
- International brands electrical parts for good stability.
- Fully enclosed safety shield, effectively avoid sawdust flying and isolate noise.
- Pneumatic compress feeding roller is applied, that can be adjusted by stages, favorable for timbers with different thickness.
- Up and down saws are responsible for 50% machining, high efficiency, energy saving and material saving.
- Configured auxiliary device for short profile to promote the smooth feed.
- Button on machine, power cut protection device for checking and saw blade replacing,provide people and machine safety.
- Precision spindle, stable performance and high precision.
What type of maintenance of 4 sided planer machine?
The maintenance of 4 sided planer machine is the core key point to gain performance and extend the machine working lifetime. Below are the common methods for maintenance.
- Change the saw blade of gear box: It is highly recommend that the oil in gear box shall change at once when buying the new 4 sided planer machine. After this time, each 2000 hours working time after the 4 sided planer machine works, the oil shall be changed with the 90# type.
- Material Feeding Cardan joint lubricate maintenance: Each month shall be give a butter oil on the cardan joints. At the same time, carriage plank, saw blade slider, horizontal beam lifting, and other easy to be flexible parts shall be added the engine oil to prevent from rusting.
- Clear the main machine body and belt: After each working day, the wood sawdust under the main machine body as well the 4 side planer machine body itself should clear immediately, especially the flat belt and the speed change belt to prevent from burning.
- For the material which is extremely wide or deformed, operator shall make the preparation of the wood material first before entering into the 4 side planer machine to work.
- Safety Operation during work: When in maintenance and change the saw blade, do not use the deformed or cracked blade. Wear the gloves and mention the saw blade rotating direction. When using the disposable flat saw blade, Operator must check the fixing screw of saw blade to prevent the blade flying out when cutting.
- Glass and Mask Googles: Prevent eye no harm of sawdust and dust.
- Gloves: Prevent hand get hurt during touch the 4 sided planer main machine or wear out wood surface material.
- Proper working clothes: Prevent long clothes or necklace having entanglement of 4 sided planer machine.
Related Products of Double Sided Planer For Sale
Wood Moulder Machine in Elasn
Wood Moulder Machine Elasn Woodworking Max.working thickness: [...]
Best Automatic Wood Planer Machine
Automatic Four Side Planer & Wood Moulder Production [...]
Wood Planer Moulder Machine With 6 Spindle
Planer Moulder Machine Four Sided 6 Spindle [...]
High Speed Four Side Planer Moulder Machine
High Speed 4 Sided Moulder Planer Machine [...]
Leave Us An Inquiry
Related Articles of Four sided planer
4-Sided Planer Machine for Sale | Industrial Wood Planer Moulder
Industrial 4-Sided Planer Machine for Continuous Wood Processing [...]
Commercial Planer for Sale | Industrial Wood Planer Machine
Commercial Planer for Professional Woodworking Production [...]
Wood Four Side Planer | Heavy‑Duty Four‑Side Moulder for Precision Planing
Definition and description of wood four side planer [...]
Best 4-Sided Planer/Moulder for Sale – ELASN Industrial Woodworking Machine
What Is a 4-Sided Planer/Moulder? This ELASN [...]
2026 Best Woodworking Surface Planers: Expert Reviews & Buying Guide
What Makes a Surface Planer Essential in 2026? [...]
Best 4 Side Planer Moulder for Sale in 2026: Complete Guide for Woodworking Factories
What is 4 Side Planer Moulder? A 4 [...]









