How to adjust the right saw blade of Wood Moulder Planer?

Published On: June 30, 2025Categories: solution, 4 Sided Planer Moulder, Articles2114 wordsViews: 1483
Wood Moulder Planer For Sale

How to adjust the right saw blade of Wood Moulder Planer?

Wood Moulder Planer has 4 direction way of saw blades separately and sequencing on above, top, left and bottom, here is the way of How to adjust the right saw blade of Wood Moulder Planer.

Please note that the adjustment handles for different models may have different positions. However, the operating principle is the same.
Step 1: Lift the short material mechanism
Remove the guard and the locking nut.
Step 2: Before installing the cutting tool
First, use a clean cloth to wipe the main shaft clean, Then, apply an appropriate amount of lubricating oil.
Step 3: Install the blade
Hold the blade and install it. After installation is complete, Sequentially install the sleeve and the blade shaft nut, Use the special wrench provided with the equipment to lock the nut, Do not use a hammer and a wrench to work together.
Step 4: Debug the right-hand cutting tool
Loosen the locking wrench for the right-hand cutting tool, Adjust the height of the right-hand cutting tool to the appropriate position, Use the comparator ruler to press closely against the guide bar, Adjust the blade tip of the holding blade to be slightly in contact with the comparator ruler.

When it is Done, Reverse the blade shaft. Check if the holding blade has a slight contact with the comparator teeth. After completion, lock the forceful blade.
Retract and lock the wrench, After the adjustment of the right-hand cutting tool is completed, Use it as the reference blade and no further adjustments are needed.

If adjustments are required for the right-hand cutting tool, Adjustment can be achieved by adjusting the movable limit bar, Use the comparator ruler to press closely against the lower cutting guide bar.

Next, demonstrate how to adjust the right cutting tool, The more the movable limit bar drops, The cutting capacity of the right-hand cutting tool will be greater

Next, install the right guard for the cutting tool, Lower the short material mechanism.

At this point, the debugging operation of the right cutting tool is completed.

Elasn Wood Moulder Planer Products

four sided planer moulder 05

Universal Spindle Four Side Planer

Universal spindle and saw blades which can move from above to left side, bottom, and right side. Flexible for customized products.

Four Sided Planer Moulder With 4 Head Without Shield

Economical Four Side Planer Without Shield

Suitable for the experienced operator and the woodworking plant which do not need too much planing work everyday.

Wood Moulding Machine 7 Head 4 Sided Moulder

Wood Planer Machine 7 Head 4 Sided Planer

Seven spindle four sided planer is often used for heavy duty wood planers, which can make more good surface processing.

Wood Moulder Planer Machines Choosing Guide

ModelNumber & Layout of Cutter HeadsProcessing FeaturesProcessing Capacity (Workpiece Width/Thickness)Applicable Scenarios & Advantages
Standard 4-Axis (with Guard)2 horizontal + 2 vertical (upper horizontal/left vertical adjustable)Basic four-side planing; guard enhances operational safety20-180mmSmall furniture factories; high-safety scenarios; suitable for short/regular square timber
Standard 4-Axis (Economy)Same as above, no guardBasic planing only; low cost but high safety risk20-180mmBudget-limited workshops; low-complexity workpieces
5-Axis Four-Side Planer4 base axes + 1 rotary cutter head (360ツー adjustable)Added profile milling (grooving, molding); processes single-side profiles20-230mmMedium furniture factories; combines flat surfaces & simple profiles (e.g., skirting boards)
6-Axis Four-Side Planer5 axes + front lower horizontal cutter head (dual reference surface)Dual lower horizontal heads ensure high-precision reference, reducing deformation errors20-230mmHigh-precision components (flooring, door/window frames); grinding-free process requirements
7-Axis Four-Side Planer6 axes + finishing cutter head (rotary/vertical)Complex profile finishing (e.g., tenons, slots); supports scraper/sanding attachments>200mmHeavy building materials, decorative moldings; integrated multi-process (profiling + finishing)
Heavy-Duty Planer7-8 axes (incl. 2 rotary heads or sanding rollers)Large-section heavy cutting; compatible with hydraulic/Powerlock tool systems>200mmLarge-scale timber mills; hardwood processing (e.g., rosewood, oak); continuous high-intensity production
High-Speed Planer4-6 optimized axes (stepless speed + spiral cutters)Feed speed ・30m/min; spiral heads reduce resistance; energy-saving & grinding-free20-230mmBatch standardized production (e.g., crates, pallets); energy-efficiency scenarios

Features of Wood Moulder Planer

Firstly of all, the surface flat planer has its simple and easy features. A woodworking surface flat planer is used for planing one reference surface or two intersecting planes of a workpiece. The working principle is that the motor drives the planer shaft to rotate at high speed through the belt, while the workpiece is fed into the planer shaft along the guide plate in close contact with the front worktable.

It is worth noting that the design of the front worktable is lower than that of the rear worktable and its height is adjustable. This height difference determines the thickness of the planing layer. In addition, by adjusting the guide plate, the processing width and Angle of the workpiece can be further changed.

On the other hand, woodworking planers are used to plane boards and square timbers to achieve precise thickness. That is the double side planer, the working principle is that the planer shaft of the single-sided woodworking planer rotates for cutting, while the wood passes through the shaft along the worktable through the feed movement of the upper and lower four rollers. The double-sided woodworking planer goes a step further. It has two tool axes that process simultaneously.

Finally, 4 side planer for sale has its unique features. Depending on the arrangement of the tool axes, it can plane the opposite or adjacent two sides of the workpiece. Three-sided and four-sided wood planers respectively use three and four tool axes to plane multiple surfaces of workpieces simultaneously, with relatively high productivity, making them highly suitable for mass production.

The woodworking fine polishing planer is specifically used for the final fine processing of wood surfaces. The fixed planing blade is installed in the middle of the worktable. The sheet material is driven at high speed by the seamless belt through the tool, thereby removing the wavy tool marks left by the previous process and making the surface smooth and straight.

Advantages of Wood Moulder Planer

  • 1. Multi-group drive rollers improve feeding efficiency;
  • 2. Spare parts are thick and solid to maintain high precision, high stability and high reliability;
  • 3. Pneumatic compressed feeding roller is applied, the pressing force can be adjusted by stages;
  • 4. Which is favorable for smooth feeding of timbers with different thickness;
  • 5. Completely sealed safety shield can avoid flying of saw dust and isolate noise efficiently and protect operators.

Working Principle of Wood Moulder Planer

The lower horizontal tool head and the right vertical tool head are similar to the planing process, while the left vertical tool head and the upper horizontal tool shaft are similar to the planing process. The advantage is that after the workpiece passes through the lower horizontal tool head and the right vertical tool head, the rough reference surface can be processed into a smooth reference surface, ensuring the accuracy of the workpiece surface processing by the latter two tool heads, the left vertical tool head and the upper horizontal tool shaft.

Finished Products of Wood Moulder Planer

wooden window frame processed by 4-sided Planer machine

Window Frame

wooden door frame four-side planed by 4-sided Planer

Door Frame

desk chair legs planed on all four sides with 4-sided Planer

Desk Chair Legs

cabinet door four-side planed woodworking finished product

Cabinet Door

solid wood flooring boards planed with 4-sided Planer

Wooden Floor

wood skirting board surface finished by 4-sided Planer

Skirting Board

Why Choose Us

Maintenance of Wood Moulder Planer

PartsMaintenance ItemPeriod timestandard
Main shaft bearingLubricating change500 hourKluber GH461-150NL
Feeding in chainTension adjustment200hBelow vertical <3mm
Hydraulic systemFilter element replacement1000hParker Series
Saw bladeEdge Angle inspection80hKeep 25°±1°

4 Side Planer For Sale Daily usage operation rules

4 Side Planer For Sale should give a pre-heat program process for 15 minutes before start 4 Side Planer For Sale, if the temperature is below 10℃, the time should extend to 25 minutes.

Stepped style feeding in strategy is suggested, for example the first sequence can planing less than 2mm, and finally the last sequence can plan less than 0.5mm.

After daily use, 3 step cleaning methods is suggested: compressed air purging → magnetic chip removal → guide rail lubrication.

The maintenance of four sided wood planer need is the core key point to gain performance and extend the four sided wood planer machine working lifetime. Below are the common methods for maintenance.

Change the saw blade of gear box:

  • It is highly recommend that the oil in gearbox shall change at once when buying the new four sided wood planer. After this time, each 2000 hours working time after the four sided wood planer works, the oil shall be changed with the 90# type.

Material Feeding Cardan joint lubricate maintenance:

  • Each month shall be give a butter oil on the cardan joints of four sided wood planer. At the same time, carriage plank, saw blade slider, horizontal beam lifting, and other easy to be flexible parts shall be added the engine oil to prevent from rusting.

Clear the main machine body and belt:

  • After each working day, the wood sawdust under the main machine body as well the four sided wood planer body itself should clear immediately, especially the flat belt and the speed change belt to prevent from burning.
  • For the material which is extremely wide or deformed, operator shall make the preparation of the wood material first before entering into the four sided wood planer to work.

Safety Operation during work:

  • When in maintenance and change the saw blade, do not use the deformed or cracked blade. Wear the gloves and mention the saw blade rotating direction. When using the disposable flat saw blade, operator must check the fixing screw of saw blade to prevent the blade flying out when cutting using four sided wood planer.

Glass and Mask Goggles:

  • Prevent eye no harm of sawdust and dust when using four sided wood planer.

Gloves:

  • Prevent hand get hurt during touch the four sided wood planer main machine or wear out wood surface material.

Proper working clothes:

  • Prevent long clothes or necklace having entanglement of four sided wood planer machine.

FAQ of Wood Moulder Planer

Q1: What is the brand name of the Machine?
A1: The brand name of the Woodworking Machine is ELASN Brand

Q2: Where is the Woodworking Machine manufactured?
A2: The Woodworking Machine is manufactured in China.

Q3: Is the Woodworking Machine certified?
A3: Yes, Have CE certification.

Q4:I am a freshman for this machine,what kind of machine I should choose?

A4:Very easy to choose, just tell us :

1. the work you want to do ?

2. the maximum size of your material ?

then we give you perfect solutions and suggestions.

Q5:When I got this machine, but I did not know how to use it,What should I do?

A5:We will send tutorial video and English version manual with the machine, If you still have some doubts,we can talk by telephone or Video. Or even send our engineers oversea to help you.

Q6:If some problems happened to this machine during warranty period,what should I do?

A6:We will supply free parts in machine warranty period if machine have some problem, While we also supply free after-service,so any doubts, just let us know, we will give you solutions.

Q7:What is the MOQ?

A7:MOQ for our products is 1 set machine, we could send it to the nearest port to you.

Related Products of Wood Moulder Planer

Leave Us An Inquiry




    Related Articles of Wood Moulder Planer

    Go to Top