Ultra Thin Wood Board Panel Wide Belt Sander Machine No More Than 1mm

Ultra Thin Wood Board Panel Wide Belt Sander Machine No More Than 1mm2024-10-18T09:38:49+08:00
panel wide belt sander

≤1 mm Thickness Panel Wide Belt Sander

Wood Panel Furniture Board Wide Belt Sander Machine can process the ultra thin thickness no more than 1mm, which is the most precise and ideal machine for those who has the plan to make money through the panel wide belt machine.

It has some features and advantages such as:

  1. Final Product Thickness Adjustable With Variable Speed Button, which is of easy operation.
  2. Multiple Material Accepted such as wood panel board, wood veneer, metal and so on.
  3. Efficiency with high output for you woodworking plant and factory.

Preservation and maintenance of panel wide belt sander sanding belts

Panel wide belt sander sand belts must be carefully managed in order to achieve their maximum effectiveness during use. Any unsuitable storage conditions, changes.
The bundling and support methods will endanger the performance of the final product of panel wide belt sander.

The most suitable storage conditions are:

  • Relative humidity between 40 and 50%;
  • The temperature is between+15 ° C and+20 ° C.
  1. Excessive humidity can cause deformation and concave surfaces on the support of the sanding belt, as well as on the inner side of the sanding process.
    High humidity causes the panel wide belt sander sand belt to move irregularly during operation, making it difficult to control the working belt.
  2. The opposite environmental conditions (low humidity) cause the opposite phenomenon: the panel wide belt sander sand belt tends to bend in the opposite direction, and the product loses elasticity and becomes fragile.
  3. It is recommended to open the package at the last minute to prevent the panel wide belt sander sanding belt from bending or breaking. It is best to tear open the packaging along the edge of the sanding belt.
  4. If the working method is significantly different from the stored sanding belt, place the sanding belt near the machine for one to two days before use. After use, place the sand belt on the rack as shown in the picture.
panel wide belt sander
panel wide belt sander
panel wide belt sander
panel wide belt sander

Application of panel wide belt sander

panel wide belt sander application
panel wide belt sander application

Related Products

Leave Us Inquiry




    Related Articles

    Go to Top